Cisco CB21AG Installation And Configuration Manual page 157

Chapter 10 Troubleshooting
Error Message No certificates were found in your computer. Please select a different
EAP option.
Explanation
but no certificates are installed on your computer. EAP-TLS requires both a Certificate Authority
(CA) certificate and a user certificate.
Recommended Action
the necessary certificates.
Error Message Please enter a profile name.
Explanation
before entering a profile name on the Profile Management (General) window.
Recommended Action
Error Message Please enter exactly 12 characters, or leave the entry field empty.
Explanation
window.
Recommended Action
MAC address for the specified access point, which must be exactly 12 characters.
Error Message The configuration name you entered is already being used. Enter a
unique name.
Explanation
(General) window that already exists.
Recommended Action
Error Message The Passphrase must be between 8 and 64 characters.
Explanation
not contain the correct number of characters.
Recommended Action
Error Message The password is empty. Please enter a password.
Explanation
window but did not enter a password, or you did not enter a password on the Enter Wireless Network
Password window.
Recommended Action
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide
OL-4211-02
You tried to choose the EAP-TLS option on the Profile Management (Security) window,
Contact your system administrator if you need help obtaining and importing
While creating a new profile, you clicked OK or chose another Profile Management tab
Enter a profile name.
You entered fewer than 12 characters in one of the fields on the Preferred Access Points
Leave the fields on the Preferred Access Points window empty or re-enter the
While creating a new profile, you entered a profile name on the Profile Management
Enter a new profile name.
The WPA Passphrase that you entered on the Define WPA Pre-Shared Key window did
Enter a WPA Passphrase with 8 to 64 characters.
You chose the Use Saved User Name and Password option on the LEAP Settings
Enter your LEAP password in the Password field.
Error Messages
10-15