Cisco CB21AG Installation And Configuration Manual page 92

Setting Security Parameters
Figure 5-11 Define PEAP (EAP-MSCHAP V2) Configuration Window
Check the Use Machine Information For Domain Logon check box if you want the client to attempt
Step 3
to log into a domain using information from the machine store (before you log on using your username
and password). Doing so enables you to get user and Novell-based login scripts, map network drives,
and implement user-based domain security policies. The default setting is checked.
Note
Step 4 Choose the certificate authority from which the server certificate was downloaded in the Server
drop-down list.
Step 5 Perform one of the following to specify the username and password that will be used for inner PEAP
tunnel authentication:
• If you want your Windows username and password to also serve as your PEAP username and
password, check the Use Windows User Name and Password check box.
• If you want to use a distinct username and password (which are registered with the RADIUS server)
to start the PEAP authentication process, follow these steps:
a.
b.
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide
5-32
If you do not check the Use Machine Information For Domain Logon check box, machine
information is not used. Authentication does not occur until you log on.
Enter your PEAP username and password in the corresponding fields.
Note Your Windows username is filled in automatically. Simply delete your Windows
username and enter your separate PEAP username.
Re-enter your password in the Confirm Password field.
Chapter 5 Configuring the Client Adapter
OL-4211-02