Cisco CB21AG Installation And Configuration Manual page 159

Chapter 10 Troubleshooting
Error Message 'x' is not a hexadecimal character.
Explanation
character.
Recommended Action
WEP" section on page
Error Message You must select a Passphrase to use Pre-Shared keys and WPA.
Explanation
(Security) window and clicked OK without entering a static WEP key.
Recommended Action
Error Message You must set at least one shared key or the WPA Passphrase to enable
security.
Explanation
and clicked OK without entering a WPA Passphrase.
Recommended Action
Error Message Your security setting is invalid for an Ad Hoc network. If you want,
security will be disabled for you. You can also configure security to Pre-shared
keys. Do you want to disable security?
Explanation
You chose Ad Hoc for Network Type on the Profile Management (Advanced) window when a
security option other than static WEP was already selected.
Recommended Action
disable security. Otherwise, click No.
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide
OL-4211-02
The character you entered on the Define Pre-Shared Keys window is not a hexadecimal
Re-enter the static WEP key following the guidelines in the
5-22.
You chose the Pre-Shared Key (Static WEP) option on the Profile Management
Enter a static WEP key on the Define Pre-Shared Keys window.
You chose the WPA Passphrase option on the Profile Management (Security) window
Enter a WPA Passphrase on the Define WPA Pre-Shared Key window.
Pre-Shared Key (Static WEP) is the only valid security option for an ad hoc network.
If you want to configure this profile for use in an ad hoc network, click Yes to
Error Messages
"Enabling Static
10-17