Cisco CB21AG Installation And Configuration Manual page 137

Chapter 9 Routine Procedures
Step 4 Choose Update the previous installation and click Next.
Step 5 When a message appears indicating that you are required to restart your computer at the end of the
installation process, click Yes.
Note
The Setup Status window appears (see
Figure 9-3
The upgrade process begins, and you are notified as each software component is installed.
When a message appears indicating that your computer needs to be rebooted, click OK and allow your
Step 6
computer to restart. The client adapter's software has been upgraded.
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide
OL-4211-02
If you click No, you are asked to confirm your decision. If you proceed, the installation process
terminates.
Setup Status Window
Figure 9-3).
Client Adapter Software Procedures
9-5