Cisco CB21AG Installation And Configuration Manual page 93

Chapter 5 Configuring the Client Adapter
Step 6 Perform one of the following:
• If you are finished configuring PEAP (EAP-MSCHAP V2) for this profile, go to
• If you want to implement added security by further refining the network certificate that will be
accepted and controlling the string used to set up the outer PEAP tunnel, follow these steps:
a.
Figure 5-12 Advanced Configuration Window
b.
c.
d.
Step 7 Click OK in each window to save your changes and to return to the Cisco Aironet Desktop Utility
(Profile Management) window.
Step 8 Refer to
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide
OL-4211-02
Click Advanced. The Advanced Configuration window appears (see
Leave the Specific Server or Domain field blank to allow the client to accept a certificate from
any server that supplies a certificate signed by the certificate authority listed in the Server
drop-down list on the Define PEAP (EAP-MSCHAP V2) Configuration window.
If the Login Name field is not filled in automatically, enter your username with nothing after it
(for example, jsmith).
Note Some RADIUS servers require that the same name be entered for both the inner and
outer PEAP tunnels. That is, the same name may need to be entered in both the Login
Name field and the User Name field on the Define PEAP (EAP-MSCHAP V2)
Configuration window. Contact your system administrator for information. If the Use
Windows User Name and Password check box is checked on the Define PEAP
(EAP-MSCHAP V2) Configuration window, the Login Name may need to match the
Windows username of the person who is logging in.
Click OK to save your settings.
Chapter 6 for instructions on authenticating using PEAP (EAP-MSCHAP V2).
Setting Security Parameters
Step 7.
Figure 5-12).
5-33