Remote Serial Gateway Statistics - GE MDS entraNET 900 Technical Manual

05-4055A01, Rev. E
3.9.2 Remote Serial Gateway Statistics Menu
The Remote Serial Gateway Statistics menu
port activity for Remote Serial Gateway entries that have been set up for
IP-to-Remote serial data. These values are reset to zero when a radio is
restarted.
Figure 3-43. Serial Data Statistics Menu
(Both COM1 and COM2 are shown, if applicable)
• —Sequential number assigned to the associated Remote.
Index
• —The unit ID of the associated Remote. Group IDs are
UnitID
displayed, when defined, to show statistics. A Group ID is
identified as
Grp x
• —Communication port being monitored (
Com
• —IP port associated with the listed device.
IP Port
• —State of the AP server for this Remote.
State
[
Listening; Connected
• —Displays the incoming port byte count.
Remote:P,B
• —Displays the outgoing port byte count.
Socket:P,B
MDS entraNET Technical Manual
(Figure
.
]
3-43) summarizes
or ).
COM1 COM2
79