Step-By-Step Instructions For Configuring A Point-To-Multipoint Serial Connection - GE MDS entraNET 900 Technical Manual

05-4055A01, Rev. E
5.5.1 Step-by-Step Instructions for Configuring a
Point-to-Multipoint Serial Connection
1. Connect a powered AP radio to a PC.
2. At the PC, open a connection with the Access Point radio using a
terminal, Telnet, or Web browser session.
3. Press to display the Main Menu.
G
4. From the Main Menu, press
5. The Local Serial Configuration menu displays the status of the AP
and ports (enabled or disabled). Set the
COM1 COM2
"enabled".
Press to select
C COM2
"enabled" and "disabled". Press
to select it.
MDS entraNET Technical Manual
to select Local Serial Configuration.
D
Figure 5-18. Main Menu
, then press
SPACE
when "enabled" is displayed
ENTER
port to
COM2
to toggle between
133