Snmp Agent Configuration Menu - GE MDS entraNET 900 Technical Manual

50

3.4.5 SNMP Agent Configuration Menu

Figure 3-17. SNMP Agent Configuration Menu
This menu provides configuration and control of SNMP functionality.
•
SNMP V3 Agent ID
upper right-hand corner of the screen. The entry of this string is
required in non-GE MDS SNMP manager programs (for
example, SNMPc). Refer to program documentation for details.
•
SNMP Read Community
read-level access. Any eight-character alphanumeric string.
•
SNMP Write Community
write-level access. Any eight-character alphanumeric string.
•
Snmp Trap Community
receive traps. Any eight-character alphanumeric string.
•
Snmp v3 Auth Password
(Message-Digest algorithm 5) hash along with the message data
to create a message digest. The digest is used by the SNMP
entities to validate the source of the packet. The password can
be any alphanumeric string between eight and 30 characters in
length.
•
Snmp v3 Priv Password
transceiver flash memory. The password is used in DES (Data
Encryption Standard) encryption, and can be any alphanumeric
string between eight and 30 characters in length. It is used when
the SNMP Agent is managing passwords locally (or initially for
all cases on restart).
• —Set or display current state of the SNMP agent.
SNMP Mode
[
Disabled, v1 only, v2 only, v3 only, v1-v2, v1-v2-v3
• —Set the SNMP version for traps. [
Trap Version
v3 Traps; v1 Traps
MDS entraNET Technical Manual
Invisible place holder
Invisible place holder
—The alphanumeric string that appears in the
—Community name with SNMP
—Community name with SNMP
—Community name with SNMP access to
—The password used in an MD5
—The privacy password stored in the
]
; ]
v1-v2-v3
v1 Traps, v2 Traps,
05-4055A01, Rev. E