Mounting Dimensions For Radios - GE MDS entraNET 900 Technical Manual

DIN Rail Mounting
Option
152

Mounting Dimensions for Radios

Figure 6-2 shows the dimensions of the AP transceiver with mounting
brackets attached. Figure 6-3
transceiver. When mounting entraNET transceivers, choose a location
that provides easy access to the connectors on the end of the radio and
an unobstructed view of the LED status indicators.
Figure 6-2. AP Mounting Bracket Spacing
Figure 6-3. Remote Mounting Brackets Spacing
NOTE: To prevent moisture from entering the radio, do not mount the
radio with the cable connectors pointing up. Also, dress all
cables to prevent moisture from running along the cables and
into the radio.
The radio is available with an optional 35 mm DIN Rail Mounting
Bracket (Part No. 03-4022A02). Equipment cabinets and racks of recent
design often employ this type of mounting. A transceiver with a DIN
bracket can be quickly installed or removed without tools.
Page 153 shows how the DIN rail bracket attaches to the back of the
radio, and how the entire radio attaches to the mounting rail.
MDS entraNET Technical Manual
shows the same view for a Remote
Invisible place holder
Invisible place holder
7.25˝ (18.4 cm)
Invisible place holder
6.69˝ (16.99 cm)
.
Figure 6-4 on
05-4055A01, Rev. E