Upgrading Remote Firmware - GE MDS entraNET 900 Technical Manual

VER
05-4055A01, Rev. E
Optional arguments:
: Turns the Stattracker function on.
ON
: Turns the Stattracker function off.
OFF
: Allowable range of port numbers that can be entered.
30000–60000
—Displays all settable optional arguments and their current values.
CMD
You can copy this list to a text file as a record of your configuration.
Displays the current software version information.
Optional arguments:
—Displays all settable optional arguments and their current values.
CMD
You can copy this list to a text file as a record of your configuration.
—Displays the Configuration Table version number.
CONFIG=
—Displays the Event List version number.
EVENT=
—Displays the Host-to-Host protocol version number.
H2H=
—Displays the OIB board hardware version number.
HREV=
—Displays the number of the currently active image.
IMAGE=<image>
—Displays the current log version number.
LOG=
—Displays the current software version number (
RADIOSW=
—Displays the software version number (
SREV1=
—Displays the software version number (
SREV2=
—Displays the radio board hardware revision number.
XHREV=
—Displays the radio software version.
XSREV1=
—Displays the radio software version.
XSREV2=

4.6 UPGRADING REMOTE FIRMWARE

You can upgrade remote radio firmware using the Remote Firmware
Upgrade Utility available from GE MDS. A local PC connection to the
radio is required to use this utility.
MDS entraNET Technical Manual
).
xx.yy.zz
).
xx.yy.zz
).
xx.yy.zz
117