GE MDS entraNET 900 Technical Manual page 137

05-4055A01, Rev. E
8. The Wizard displays a prompt to select a point-to-point or
point-to-multipoint connection. Press
(point-to-point).
Figure 5-9. Point-to-Point Selection
9. The Wizard displays a prompt for the Unit ID of the single Remote
radio. Press to set the Remote ID (generally the last four digits of
A
the Remote serial number). Type the Unit ID of the Remote radio.
Press to accept the Unit ID. Then press
ENTER
Figure 5-10. Set Remote Unit ID
MDS entraNET Technical Manual
to select "One Remote"
A
to continue.
N
127