05-4055A01, Rev. E
Figure 3-62. Packet Rx Errors Exceeded Threshold Menu
These configuration settings are intended for data-intensive applications
and must be customized for your specific application.
Maximum Receive Errors
be exceeded before a redundant AP considers itself to be
malfunctioning. This setting works in conjunction with the
setting below. [
0-1000; 300
•
Receive Error Count Interval
number of seconds to count Packet Receive errors (works with
Maximum Receive Errors
3.13 DNP3 ROUTING MENU
This menu
(Figure
3-63) is used to configure the AP to support DNP3
protocol routing. See also
NOTE: Detailed information on the DNP3 protocol is available on the
DNP Users' Group Web site at www.dnp.org.
MDS entraNET Technical Manual
Invisible place holder
—Specify the number of packet errors that must
]
—This field is used for entering the
above). [
Time interval; 300 sec
DNP3 Protocol-Aware Networks
Interval
]
on Page 8.
97