GE MDS entraNET 900 Technical Manual page 48

Starting a Telnet
Session
38
NOTE: If the radio is powered up or restarted while connected to a
terminal, a series of pages of text relating to the startup of the
internal microcomputer is displayed. Wait for the log-in screen
before proceeding.
4. Press to receive the
ENTER
5. Enter the username (the default username is
6. Enter your password (the default password is
your password keystrokes do not appear on the screen. Press
NOTE: Passwords are case sensitive. Do not use punctuation marks.
You may use up to eight alphanumeric characters.
The Starting Information Screen is displayed
here, you can review basic information about the radio, or press
proceed to the Main Menu.
Figure 3-7. Starting Information Screen—Local Console Session
NOTE: This method requires that you know the IP address of the radio
beforehand. If you do not know the address, use the Local
Console method (above) and access the Starting Information
Screen. The address is displayed on this screen.
1. Connect a PC to the
network. If connecting directly, use an Ethernet crossover cable; if
connecting over a network, use a straight-through cable. The
LED lights to indicate an active connection.
MDS entraNET Technical Manual
prompt.
login
Invisible place holder
port on the radio, either directly or over a
LAN
). Press .
admin ENTER
). For security,
admin
ENTER
(Figure 3-7). From
to
G
LAN
05-4055A01, Rev. E
.