GE MDS entraNET 900 Technical Manual page 138

128
10.The next screen prompts for the input serial data port. Press
then press
SPACE
played selection. Then press
Figure 5-11. Select Remote Port
11.The next screen prompts for the baud rate and byte format.
Press to set the Data Baud Rate. Press
A
baud rate options until "19200" is displayed. Press
the Data Baud Rate.
Press to set the Data Byte Format. Press
B
the byte format options until "8N1" is displayed. Press
accept the Data Byte Format. Then press
Figure 5-12. Set Data Baud Rate and Data Byte Format
MDS entraNET Technical Manual
to toggle to . Press
COM2
to continue.
N
and
A
to accept the dis-
ENTER
to cycle through the
SPACE
to accept
ENTER
to cycle through
SPACE
to
ENTER
to continue.
N
05-4055A01, Rev. E