Basic Device Information; Starting Information Screen - GE MDS entraNET 900 Technical Manual

Log Out Using a
Web Browser
05-4055A01, Rev. E
Click in the left-hand frame of the browser window. The
Logout
right-hand frame changes to a log-out page. Follow the remaining
instructions on this screen.
This completes the instructions for connecting to the entraNET radio for
PC configuration and control. The next section contains detailed menu
screens and settings you can use to specify the behavior of the radio.

3.3 BASIC DEVICE INFORMATION

3.3.1 Starting Information Screen

Upon successful log-in to the menu system, the Starting Information
Screen appears. This screen provides a read-only overview of the
current operating conditions on the transceiver
some items can be changed using the Device Information Screen
described on Page 84.
Figure 3-11. Starting Information Screen
• —This is a user-defined name for the radio that
Device Name
appears on every screen (40 characters maximum).
• —Shows the radio Internet Protocol (IP) address.
IP Address
• —Shows the transceiver condition:
Device Status
• Operational—The radio is operating normally
• Alarmed—An alarm event has been logged and not cleared.
NOTE: If an alarm is present when this screen is displayed, an "
appears to the left of the
also flashes.) Typing "A" on your keyboard takes you directly
to the Current Alarms Screen.
MDS entraNET Technical Manual
(Figure 3-11), although
Invisible place holder
field. (The
Device Status
"
A
LED
PWR
43