Omron E5CZ User Manual page 190

Note
Transfer output
Set point
Set point during SP
ramp
PV
MV monitor (heating) Standard: −5.0 to 105.0
MV monitor (cooling) 0.0 to 105.0
(1)
Setting (monitor) range
type
SP lower limit to SP upper limit
SP lower limit to SP upper limit
Temperature: Sensor setting
range lower limit to sensor set-
ting range upper limit
Analog: Scaling lower limit to
scaling upper limit
Heating/cooling: 0.0 to 105.0
Initialized when the transfer output type is changed.
Initialized if the input type, temperature unit, scaling upper/lower limit, or SP upper/
lower limit is changed when the transfer output type is SP, ramp SP, or PV.
(When initialized by the initializing settings, it is initialized to 100.0/0.0.)
Default (transfer output
upper/lower limits) (See
note 1)
SP upper limit/lower limit
SP upper limit/lower limit
Sensor setting range upper/
lower limit
Scaling upper/lower limit
100.0/0.0
100.0/0.0
Unit
EU
EU
EU
EU
%
%
167