Configuration
2.
3.
4.
5.
6.
Document 800-04559 Rev D
11/09
Figure 3-75
The DVR can be configured to run self-diagnostics and report the results.
Highlight the box beside System, then press # to select the interval that you want
the DVR to run self-diagnostics on the system. You can select from 1 hr. to 30
days or Never.
Highlight the Setup... box beside Check Recording, then press #. The Check
Recording screen appears (see
Highlight Schedule On, then press # to toggle On and Off. When set to On, you
can select the day, time range and interval that you want the DVR to run
self-diagnostics on the recorder. The Interval can be selectable from 1 min. to 7
days or Never. The
Note
The higher the number under the No. heading, the higher its
priority.
Figure 3-76
Highlight the box under the Interval column beside each alarm-in and press, then
press # to change the interval that you want the DVR to run self-diagnostics on
Alarm Inputs. You can select from 1 hr. to 30 days or Never.
Highlight the Storage tab and the Storage screen displays.
System Event — Health Check Screen
Figure
3-76).
box allows you to delete a check recording schedule.
Check Recording Screen
99