2. In the Channel box, select the camera that you want to configure.
3. Next to Cover-Area, select one of the following options:
•
Preview
•
Record
4. Click Set.
Configuring the Text Overlay
To configure a camera's text overlay settings
1. Go to Main Menu Setting Camera Encode Overlay.
Figure 8-6
2. In the Channel box, select the camera that you want to configure.
3. To set the time display, next to Time Display, select the Record check box, and then click
Set. Drag the time display to the desired position on the screen.
4. To set the channel display, next to Channel Display, select the Record check box, and
then click Set. Drag the channel display to the desired position on the screen.
5. To copy the settings to one or more additional cameras, follow these steps:
a.
Click Copy.
b.
Click the specific camera(s) that you want to copy the settings to, or click All to select
all the cameras, and then click OK.
Blocks an area when the DVR is in live view mode.
Blocks an area when the DVR is in record mode.
Configuring Camera Settings
65