Alarm-Out Screen; Figure 3-41 Alarm-Out Settings Screen; Figure 3-42 Alarm-Out Schedule Screen - Honeywell HRXD9 User Manual

Configuration

Alarm-Out Screen

1.
2.
3.
4.
5.
6.
Document 900.0856 Rev 3.00
11/07
Highlight Alarm-Out in the Devices menu and press
(Figure 3-41) allows you to change the settings and establish a schedule for each
alarm output from the DVR.
Figure 3-41
Each alarm output can be given its own title by highlighting the box under the
Title heading and pressing
the title.
Highlighting the boxes under the Type heading allows you to set the alarm output
for NO or NC (normally open or normally closed).
Highlighting the box beside Dwell Time and pressing
dwell time of the alarm output. Dwell times range from 5 seconds to 15 minutes.
Highlighting the Schedule tab causes the Schedule screen
display.
Figure 3-42
You can add and edit alarm output schedules on this screen. Highlight the + and
press to add a schedule. Highlighting the boxes in the columns and pressing
allows you to edit the information in those boxes.
Alarm-Out Settings Screen
. A virtual keyboard appears allowing you to enter
Alarm-Out Schedule Screen
. The Alarm-Out screen
allows you to set the
(Figure 3-42) to
65