Ptz Control And Color Setup - Honeywell HLVR4 User Manual

Overview of Navigation and Controls

PTZ Control and Color Setup

Cable Connection
PTZ Setup
42
All the operation here is based on PELCOP protocol.
Please follow the procedures below to go on with cable connection:
•
Connect the dome RS485 port to DVR 485 port.
•
Connect dome video output cable to DVR video input port.
•
Connect power adapter to the dome.
The camera video should be in the current screen. Before setup, please
check the following connections are right:
•
PTZ and decoder connection is right. Decoder address setup is right.
•
Decoder A (B) line connects with DVR A (B) line.
Boot up the DVR, input user name and password.
In the main menu, click SETTING
Figure 5-21 PAN/TILT/ZOOM
•
Channel: select the current camera channel.
•
Protocol: select corresponding PTZ protocol (such as PELCOP).
PAN/TILT/ZOOM.