Configuring The System Settings; Setting The Date And Time Manually; Protecting Against Unauthorised Access - Siemens Gigaset DX800A User Manual

Configuring the system
settings
You can make the following settings via the
menu on the base, on a registered
Gigaset SL78H, SL400H, S79H handset or via
the Web configurator on the base.
The following steps are carried out using the
base.
The majority of the settings can also be
made via a registered Gigaset SL78H,
SL400H or S79H handset. The procedure is
similar to that on the base, although the
menu structure is slightly different.
Instructions on operating via the base's Web
configurator can be found in the user guide
on the enclosed CD.
Setting the date and time
manually
To ensure you have the correct time for
incoming calls and to use the alarm clock
and calendar, the date and time must be set.
Please note
The address of a time server on the Internet
is stored on your base. The date and time
are taken from this time server provided
that the base is connected to the Internet
and synchronisation with the time server is
activated. Manual settings are overwritten
in this case.
If the date and time on the base have not yet
§Time§
been set, the display key appears.
§Time§
Press the display key.
Or:
¢ ¢
Ï Settings
v
Date/Time

Configuring the system settings

¤
You can enter data in the following fields:
Date:
Enter day, month and year as an 8-digit
number via the keypad. e.g., 4
Q 2Q Q for 14/01/2010.
Time:
Enter the hours and minutes in 4-digit
format via the keypad, e.g.,
QM 5 for 07:15 am.
¤
Press the display key
the settings.
Protecting against
unauthorised access
Protect the base system settings with a PIN
known only to you. You have to enter the
system PIN if you register or de-register a
handset, change local network settings, per-
form a firmware update or reset the phone
to default settings.
Changing the system PIN
You can change the base's 4-digit system PIN
(default setting: 0000) to a 4-digit PIN known
only by you.
Setting a system PIN facilitates remote oper-
ation of the answering machine
¢
( page 104).
¢ ¢
Ï Settings
v
¢
System PIN
~
If necessary, enter the current
system PIN for the base and
§OK§
press
~
Enter new system PIN.
§OK§
Press the display key.
§Save§
to save
System
.
133