Setting The Sms Service Centre/Defining The Send Line - Siemens Gigaset DX800A User Manual

Setting the SMS service
centre/defining the send line
SMS messages are exchanged between SMS
service centres operated by service provid-
ers. You must enter the SMS service centre
through which you wish to send and receive
SMS messages into your phone. You can
receive SMS messages from every SMS serv-
ice centre that is entered, provided you have
registered with your service provider. This
happens automatically when you send the
first SMS via the relevant service centre.
Your SMS messages are sent via the SMS
service centre that is entered as the active
send service centre. However, you can acti-
vate any other SMS service centre as the
active send service centre to send a current
message (page 89).
If no SMS service centre is entered, the SMS
menu only contains the entry Settings.
Enter an SMS service centre
Entering/changing SMS service
centres
¤
Find out about the services and special
functions offered by your service pro-
vider before you make a new applica-
tion and/or before you delete pre-config-
ured numbers.
Ë
¢
v
Messaging
¢
Service Centres
s
Select SMS service centre
(e.g., Service Centr. 1) and
§OK§
press
¤
You can enter data in the following fields:
Active Send:
Select Yes if SMS should be sent via the
SMS service centre. For the SMS centres 2
to 4, the setting only applies to the next
SMS.
SMS Service Centre no.:
Enter the number of the SMS service.
(page 89).
¢ ¢
SMS Settings
.
Sending SMS (text messages)
E-mail Service no.:
Enter the number of the e-mail service.
Send via:
Select the connection (fixed line/ISDN
MSN or VoIP connection) via which you
wish to send the SMS messages.
§Save§
Press the display key.
Please note
u
If the selected send connection is
deleted from the configuration, the
fixed line or first ISDN connection in
the configuration is used.
u
If you have selected a VoIP connec-
tion and the attempt to transmit the
SMS messages fails, the SMS is stored
in the incoming message list with
error status. Even if you have acti-
vated the Automatic Fallback to
Fixed Line option (
tor), your telephone will not attempt
to send the SMS via the fixed line/
ISDN.
Sending an SMS via another SMS
service centre
¤
Select Service Centr. 2, 3 or 4 and acti-
vate it as the active send service centre
(set Active Send = Yes). Service Centr. 1 is
automatically deactivated as the send
service centre for the next SMS.
¤
Send the SMS.
This setting only applies to the next SMS to
be sent. After that, the setting returns to
Service Centr.1.
¢
Web configura-
89