Siemens Gigaset DX800A User Manual page 151

Customer Service & Assistance
Status Meaning
code
0x483 Too many "jumps":
The query was rejected because the
service server (proxy) has decided that
this query has already passed through
too many service servers. The maximum
number is defined beforehand by the
original sender of the query.
0x484 Wrong number:
In most cases this response means that
you have simply omitted one or more
digits in the phone number.
0x485 The URI dialled is not unique and cannot
be processed by the VoIP provider.
0x486 The called party is busy.
0x487 General faults:
The call was cancelled before a call was
established. The status code confirms
receipt of the interruption signal.
0x488 The server cannot process the query
because the data entered in the media
description is not compatible.
0x491 The server notifies that the query will be
processed as soon as a previous query
has been completed.
0x493 The server rejects the query because the
phone cannot decrypt the message.
The sender has used an encryption
method that either the server or the
receiver phone cannot decrypt.
0x500 The proxy or the receiving device has
discovered a fault while executing the
query. It is therefore impossible to exe-
cute the query. If this occurs, the caller or
the phone displays the fault and repeats
the query after a few seconds.
The number of seconds after which
the query can be repeated may be
transmitted to the caller or phone by the
receiving device.
0x501 The query cannot be processed by the
recipient because the recipient does not
have the functionality that the caller
requires. If the recipient understands the
query but does not process it because
the sender does not have the necessary
rights or the query is not permitted in
the current context, status code 405 is
transmitted instead of 501.
150
Status Meaning
code
0x502 In this case, the receiving device that
transmits this error code is a proxy or a
gateway and has received an invalid
response from its gateway via which this
query is to be processed.
0x503 The query cannot be processed by the
receiving device or the proxy at present
because the server is either overloaded
or is being serviced. If it is possible for
the query to be repeated in the
foreseeable future, the server informs
the caller or the phone of this.
0x504 Time limit exceeded at the gateway.
0x505 The server rejects the query because the
indicated version number of the SIP pro-
tocol does not concur with at least the
version that is used by the server or SIP
device involved in this query.
0x515 The server rejects the query because the
message exceeds the maximum permit-
ted size.
0x600 The called party is busy.
0x603 The called party has rejected the call.
0x604 The called URI does not exist.
0x606 The communication settings are not
acceptable.
0x701 The called party has hung up.
0x703 Connection cancelled because of time-
out.
0x704 Connection interrupted because of a
SIP error.
0x705 Wrong dialling tone
0x706 No connection established
0x751 Busy tone:
No codec match between the calling
and called party.
0x810 General socket layer error: User is not
authorised.
0x811 General socket layer error:
Wrong socket number
0x812 General socket layer error: Socket is not
connected.
0x813 General socket layer error:
Memory error