Setting The Date And Time - Siemens Gigaset DX800A User Manual

First steps

Setting the date and time

There are three methods of setting the date and time:
u
The base updates the date and time from the ISDN network the first time you
make an outgoing, external call.
u
You can configure your base so that once the base is connected to the Internet,
the date and time is transferred from a time server.
You can activate/deactivate the synchronisation with a time server via the Web
configurator. Detailed information can be found in the Web configurator's user
guide on the enclosed CD.
u
You can set the date and time manually via the base menu or one of the regis-
tered handsets
To ensure you have the correct time for incoming calls and to use the alarm clock
and calendar, the date and time must be set.
Setting the date and time manually
If the date and time have not been set, the time will flash in the base's idle display
(00:00) and
Calls
¤
Press the key under
Enter day, month and year as an 8-digit number via the keypad,
e.g., Q4QO2Q Q for 04.09.2010. This overwrites the dis-
played date.
¤
Press down on control key s to scroll to the time entry line.
¤
Enter the hours and minutes in 4-digit format via the keypad,
e.g., QM 5 for 07:15 am.
¤
Press the display key
38
¢
( page 133).
§Time§
is displayed above the right display key.
Time
§Time§
on the display screen.
§Save§
to save the settings.