Setting Up The Base - Installation Wizard - Siemens Gigaset DX800A User Manual

First steps
Setting up the base – installation wizard
As soon as the phone is connected to the mains power supply, the firmware is
started. The telephone checks which telephone connections it is connected to.
If no connections have been generated on the base yet, the installation wizard
starts. The wizard allows you to make all necessary settings for your phone.
The following message appears in the display.
Setup - Welcome
No
Please note
u
The installation wizard only starts if no connection has been configured on
the base yet. If connections have already been configured, you can start the
IP and ISDN wizards (individually) via the menu, if necessary.
u
Use only the installation wizard on the base, but not on a registered handset.
Several individual wizards are combined to form the installation wizard. The indi-
vidual wizards that start on your device depend on the type of your device and the
connections to which the device is connected. The following individual wizards are
included in the installation wizard:
1 ISDN wizard
2 IP wizard
3 Registration wizard
4 Connection wizard
18
?
Would you like help
setting up
your phone?
Yes
¤
Press the display key
installation.
§Yes§
to start