Voip Status Codes - Siemens Gigaset DX800A User Manual

Exclusion of liability
Some displays may contain pixels (pic-
ture elements), which remain activated
or deactivated. As a pixel is made up of
three sub-pixels (red, green, blue), it is
possible that pixel colours may vary.
This is completely normal and does not
indicate a fault.

VoIP status codes

In the following tables you will find the
meaning of the most important VoIP status
codes and messages.
Status Meaning
code
0x31 IP configuration error
IP domain not entered.
0x33 IP configuration error:
SIP user name ( Authentication Name)
not entered.
This is shown, for example, when dialling
with a line suffix, if no connection is con-
figured for the suffix on the base.
0x34 IP configuration error:
SIP password (Authentication Pass-
word) not entered.
0x300 The called party can be reached under
multiple phone numbers. If the VoIP pro-
vider supports this, a list of the phone
numbers is transmitted as well as the
status code. The caller can select the
number to which he wants to make the
connection.
0x301 Permanently diverted.
The called party can no longer be
reached under this number. The new
number is transferred to the phone
together with the status code, and the
phone then no longer accesses the old
number but dials the new address
immediately.
0x302 Temporarily diverted.
The phone is informed that the called
party cannot be reached under the
dialled number. The call is diverted for a
limited period. The phone is also noti-
fied of the length of the diversion.
Customer Service & Assistance
Status Meaning
code
0x305 The query is sent to a different "proxy
server", e.g., to balance incoming que-
ries. The phone will make the same
query once again to another proxy
server. This is not a redirection of the
address per se.
0x380 Other service:
The query or call could not be trans-
ferred. However, the phone is notified
of other options available to connect
the call.
0x400 Wrong call
0x401 Not authorised
0x403 The requested service is not supported
by the VoIP provider.
0x404 Wrong phone number.
No connection on this number.
Example: While making a local call you
have not dialled the area code although
your VoIP provider does not support
local calls.
0x405 Method not permitted.
0x406 Not acceptable.
The requested service cannot be pro-
vided.
0x407 Proxy authentication required.
0x408 The party cannot be reached
(e.g., account has been deleted).
0x410 The requested service is not available
from the VoIP provider.
0x413 Message is too long.
0x414 URI is too long.
0x415 Query format is not supported.
0x416 URI is faulty.
0x420 Incorrect ending
0x421 Incorrect ending
0x423 The requested service is not supported
by the VoIP provider.
0x480 The dialled number is temporarily una-
vailable.
0x481 The recipient is not available.
0x482 Double service query
149