Configuring Voip Connections - Siemens Gigaset DX800A User Manual

Configuring the system settings
Setting up a new MSN
q
Select the row MSN - Name of
an empty MSN entry.
~
Enter MSN name (max. 16 char-
acters) (optional).
s
Jump to the corresponding
MSN - Number line.
~
Enter MSN number (max. 20 dig-
its; without area code = prefix).
¤
Repeat this process for other MSNs, if
required.
¤
Press the display key
changes.
Once the ISDN wizard is complete, the
connection wizard starts automatically.
This enables you to assign send and receive
connections to the base's internal parties
¢
( page 32).
Please note
If you do not set up any MSNs, all ISDN
calls will be made on the main number of
your ISDN connection. ISDN is shown for
this connection in the lists for selecting
the send and receive connections
¢
( e.g., page 137,
Changing/deleting an MSN
q
Select the MSN - Name / MSN -
Number for the MSN entry that
you wish to edit.
Ñ
Delete the previous name/
number.
~
Enter the new MSN name/
number, if required.
¤
Repeat this process for other MSNs, if
required.
¤
Press the display key
changes.
If you have deleted both the MSN name and
number and not entered any new values, the
MSN is deleted.
136
§Save§
to save the
page 89).
§Save§
to save the
If the MSN you have deleted was the send
connection (page 113)
then a new send connection (the MSN with
the lowest ranked number) will automati-
cally be assigned to this internal party.
Configuring VoIP
connections
You can configure up to six VoIP connections
on your telephone, i.e., you can assign up to
six VoIP phone numbers to your phone.
You need to set up an IP account (VoIP
account) with a VoIP provider for each con-
nection. You must save the access data for
this IP account on your phone. The IP wizard
will help you to do this.
Starting the IP wizard:
If your base is connected to the Internet and
ISDN, start the IP wizard as follows:
¢ ¢
v ÏSettings
¢
VoIP
If your base is connected to the Internet and
analogue fixed line, start the IP wizard as fol-
lows:
¢ ¢
v ÏSettings
In both cases you will see the following
question in the display:
IP Wizard
?
Start IP
installation wizard?
No
The remaining procedure for the IP wizard is
described on page 24.
of an internal party
Connection Wizard
VoIP Wizard
Yes