Changing The Internal Number Of An Internal Party; Using Bluetooth Devices - Siemens Gigaset DX800A User Manual

Changing the internal
number of an internal party
The base is assigned the internal number
INT 1 as a default setting.
A handset is automatically assigned the
lowest free internal number from 2–7 during
registration. If all numbers are in use, then
the number 7 is overwritten as long as this
handset is in idle status. You can change the
internal number of the base and all regis-
tered handsets (1–7).
u
Open the list of internal parties.
Your own device is marked
with < .
§Options§
Open menu.
Assign Handset No.
Select and press
s
Select the internal party.
r
Select a new number.
s r
Repeat the process for other
internal parties as required.
Make sure you do not assign an internal
number (1 to 7) twice.
To finish:
§Save§
Press the display key to save the
entry.
You will hear the error tone if an internal
number has been assigned twice.
¤
Repeat the procedure with a free number.
Please note
Numbers 1 to 7 are available for selection.
Internal number 8 is reserved for any fax
machine connected to the FAX port.
§OK§
.
Connecting/using other devices

Using Bluetooth devices

Your base can use Bluetooth™ to communi-
cate wirelessly with other Bluetooth devices.
You can use Bluetooth to register the follow-
ing devices on your base:
u
One Bluetooth headset
u
Up to five Bluetooth GSM mobiles or data
devices (PC, PDA).
Before you can use your Bluetooth devices,
you must first activate Bluetooth and then
register the devices to the base.
To use the phone numbers, dialling codes
(country and area code) must be stored on
the base (page 134).
You will find a description of how to operate
your Bluetooth devices in the user guides for
these devices.
Activating/deactivating Bluetooth
mode
¢
v ò Bluetooth
Activation Select and press
vate or deactivate Bluetooth
mode (³ = activated).
When the base is in idle status, the ò icon in
the header indicates that Bluetooth mode is
¢
activated ( page 4).
As soon as Bluetooth is activated, your base
is visible to all Bluetooth devices in the
receiving range (maximum 10 m) and can
communicate with all of the devices
included in the "known devices" list.
Alternatively, you can assign Bluetooth inter-
face activation to a display or function key
¢
on the base ( page
you to activate/deactivate Bluetooth at the
push of a button.
§Change§
to acti-
125). This then allows
117