Table of Contents
Advertisement
First steps
f.
INT 1
Connection for
outgoing calls
f IP1
If handsets are already registered to the base, you are requested to assign send and
receive connections for the handsets. The following is shown in the display:
Assign connections to handset INT ...?
¤
Perform steps
You are then requested to assign the receive connections to the three answering
machines on the base. "Assign connections to answering machine ?" is shown in
the display.
¤
Perform steps
Please note: Each connection may only be assigned to one of the three local
answering machines as a receive connection. If you assign a receive connection to
an answering machine and this connection is already assigned to another answer-
ing machine, the "old" assignment is deleted.
After successfully configuring the settings, you will briefly see the following display:
Connection Wizard
36
Back
a.
to
f.
for each registered handset.
a.
to
d.
for each answering machine.
‰
Connection
assignment
complete.
If the base is to make calls via a differ-
ent connection/phone number:
¤
Press right on the control key v
repeatedly, until the required con-
g
nection is displayed (in the exam-
ple, IP1).
Save
¤
Press the display key
the settings.
§Save§
to save
Hide quick links:
Advertisement
Table of Contents
