Siemens Gigaset DX800A User Manual page 38

Completing the installation
This completes the installation. The following is shown in the display:
Setup
‰
Setup
complete
Afterwards, the base returns to idle status (for an example of the display in idle sta-
¢
tus page 4).
The answering machines of the base to which you assigned a receive connection
are activated and switched on in answer and record mode with a standard
¢
announcement ( page
Please note
To protect your phone and its system settings from unauthorised access, please
define a 4-digit number code (system PIN) known only to yourself. This code
must be entered before you can register/de-register handsets or alter your
phone's VoIP or LAN settings.
The default system PIN is 0000 (4 x zero). For instructions on changing the PIN
¢
( page 133).
98).
First steps
37