Specifications; Writing And Editing Text - Siemens Gigaset DX800A User Manual

Appendix

Specifications

Power consumption of the base
In idle status
During a call
General specifications
Interfaces ISDN, analogue fixed line,
Ethernet, Bluetooth
DECT standard Supported
GAP standard Supported
No. of channels 60 duplex channels
Radio frequency 1880–1900 MHz
range
Duplex method Time multiplex,
10 ms frame length
Channel grid 1728 kHz
Bit rate 1152 kbit/s
Modulation GFSK
Language code 32 kbit/s
Transmission power 10 mW, average power per
channel
Range (handsets) up to 300 m outdoors,
up to 50 m indoors
Power supply 230 V ~/50 Hz
Environmental con- +5°C to +45°C, 20% to
ditions for operation 75% relative humidity
Dialling mode DTMF (tone dialling)
Codec G.711, G.726, G.729AB with
VAD/CNG, G.722
Quality of Service TOS, DiffServ
Protocols DECT, GAP, SIP, RTP, DHCP,
NAT Traversal (STUN), HTTP
154
Pin connections on the fixed line
telephone jack
Approx. 3.6 W
Approx. 4.3 W

Writing and editing text

The following rules apply when writing text:
u
u
u
u
u
u
u
4 5
6
3
2 7
1 8
Each key between Q and O is
assigned several letters and characters.
Control the cursor with u v t s.
Press and hold u or v to move the cur-
sor word by word.
Characters are inserted to the left of the
cursor.
Press the star key * to display the table
of special characters. Select the required
character and press the display key
to insert the character at the cursor posi-
tion.
Press and hold Q to O to enter digits.
Ñ
Press display key
acter to the left of the cursor. Press and
hold to delete the word to the left of the
cursor.
The first letter of the name of directory
entries is automatically capitalised, fol-
lowed by lower case letters.
1 a
2 unused
3 unused
4 unused
5 unused
6 unused
7 unused
8 b
§Insert§
to delete the char-