Table of Contents
Advertisement
Making calls using network services
Initiating ringback during an external
consultation call:
You wish to initiate an external consultation
call during an external call. The line is busy or
there is no answer.
¢
§Options§
Ringback
Select and press
§End§
Press the display key to return to
the party on hold.
Please note
u
You can only activate one ringback at
a time. If you activate a second ring-
back, the first one is automatically
deleted.
u
The ringback is initiated on the previ-
ously used send connection.
u
The ringback can only be received on
the device that activated the ring-
back.
Accepting a waiting call
You are making an external call and hear the
call waiting tone.
§Accept§
Press the display key.
Once you have accepted the waiting call,
you can switch between the two callers
¢
("Call
swapping"
both at the same time ("Conference"
¢
page
65).
Please note
u
Without CLIP, a waiting call is only
announced with a signal tone.
u
An internal, waiting call is shown on
the display. You can neither accept
the internal call nor reject it.
u
For instructions on accepting a wait-
ing external call during an internal
¢
call,
page
116.
64
§OK§
.
page
65) or speak to
Rejecting a waiting call
You can hear the call waiting tone but do not
want to speak to the caller.
On the fixed line connection:
¢
§Options§
Reject Waiting call
On the ISDN or IP connection:
§Reject§
Press the display key.
The caller hears the busy tone.
Please note
You can also replace the receiver to end
the current call and lift the receiver again
to accept the second call.
Consultation calls (external)
You can call a second external caller. The first
call is placed on hold.
During an external call:
§Ext.Call§
Press the display key.
The previous call is placed on
hold. The caller hears an
announcement or music on
hold.
~
Enter the second participant's
telephone number.
The phone number is dialled. You are con-
nected to the second participant.
If the participant does not answer, select the
§End§
display key
to return to the first partici-
pant.
The consultation call is established via the
same send connection as the first call.
Please note
You can also select the second partici-
pant's phone number from the directory
(page
75), redial list or a call list
(page
68).
Hide quick links:
Advertisement
Table of Contents
