Table of Contents
Advertisement
Displaying the phone number you
are calling (COLP)
Prerequisites:
u
Your network provider supports COLP
(Connected Line Identification Presenta-
tion). You may need to activate COLP with
the provider (ask your provider about
this).
u
The called party has not activated COLR
(Connected Line Identification Restric-
tion).
For outgoing calls, the phone number of the
connection on which the call is received is
displayed on the base.
The displayed number may differ from the
number you have dialled. Examples:
u
The called party has activated call divert.
u
The call is answered by another connec-
tion within a PABX system.
If there is an entry in the directory for this
phone number, the corresponding name
will be displayed.
Please note
u
The actual number of the connection
you have reached (or the assigned
name) is displayed instead of the
called number during call swapping,
conference calls and consultation
calls.
u
When the phone number is copied to
the directory and the redial list, the
dialled number (not the displayed
number) is copied.
Ending a call
&
Replace the receiver or press the
red end key T.
Or if you are making the call with a headset:
¤
Press the Headset function key or red
T
end key
on the base.
Accepting a call
An incoming call is signalled in three ways:
by ringing, by a display on the screen and by
the flashing handsfree key d.
Please note
Only calls to the receive connections
assigned to the base are signalled
¢
(
page
138).
The following applies in particular if ISDN
MSNs or VoIP connections are configured
on your base:
u
If you have not assigned the receive
connections on your base, all incom-
ing calls are signalled on the base and
all handsets.
u
If you have assigned connections but
not assigned any connection to the
base, a handset or the answering
machine as the receive connection,
calls on this connection will not be
signalled.
If the number is only assigned to an
answering machine, calls will not be
signalled. If the answering machine is
switched on, it will accept the call.
Accept the call by:
¤
Picking up the receiver.
¤
Pressing the handsfree key d.
¤
Pressing the display key
the call to the answering machine.
¤
¢
§Options§
Select
the call to the answering machine
¢
(
page
102). If the receive connection
is assigned to an answering machine and
that answering machine is not busy with
another call:
– For calls to one of your VoIP or ISDN
connections:
§Options§
Select
divert the call to the answering
¢
machine
(
page
– For calls to your fixed line connection:
Press the display key
the call to the answering machine.
Making calls
Ô
to divert
Divert to AM to divert
¢
Divert to AM to
102).
Ô
to divert
53
Hide quick links:
Advertisement
Table of Contents
