Configuring An Answering Machine For Quick Dial - Siemens Gigaset DX800A User Manual

Configuring an answering
machine for quick dial
You can use quick dial to make direct calls to
a network mailbox or the integrated base
answering machine.
Assigning key 1, changing
assignment
Quick dial settings are device-specific.
You can assign a different answering
machine to key on the base and each
registered handset.
No answering machine is preconfigured for
quick dial in the default settings.
Press and hold key .
Or:
¢
Ì Answering Machine
v
¢
Set Key 1
The list of VoIP connections and the ISDN/
fixed line connection assigned to the base as
receive connections is displayed. Net AM:
xxx is displayed, where xxx is replaced by
the default connection name (Net AM: IP1
to Net AM: IP6, Net AM: Fixed Line or
Net AM: ISDN).
This list contains the entry Answering
Machine for the local base answering
machines.
s
Select entry and press
(Ø = on).
You have selected the local Answering
Machine:
Quick dial is immediately activated for the
local answering machines on the base.
T
Press and hold red end key (idle
status).
You have selected a network mailbox:
If a number is already stored for this network
mailbox, quick dial is activated immediately.
T
Press and hold red end key (idle
status).
If no number is saved for the network mail-
box, you are asked to enter the number of
the network mailbox.
s
~
§Save§
T
Quick dial is activated.
You can only assign quick dial to one
answering machine.
You can also call the network mailboxes
for the base's receive connections
directly via the message key
¢
(
Calling the answering machine via
quick dial
If you have set a network mailbox for quick
dial you are connected directly to this net-
work mailbox.
d
You hear the network mailbox announce-
§Select§
ment.
If you have set quick dial for the local
answering machine on the base, message
playback starts only if one answering
machine is assigned a receive connection for
the base. If multiple local answering
machines are assigned to the base, then a list
of answering machines will appear.
q
Using the network mailbox
Jump to the Network Mailbox
line.
Enter the number for the net-
work mailbox.
Press the display key.
Press and hold red end key (idle
status).
Please note
page 108).
Press and hold.
If necessary, press the handsfree
key.
Select answering machine and
§OK§
press .
107