Registering Bluetooth Devices - Siemens Gigaset DX800A User Manual

Connecting/using other devices

Registering Bluetooth devices

To register a Bluetooth device, you need to
search for it and then add it to the list of
known devices.
The list of known devices can hold a maxi-
mum of one headset and five data devices/
mobiles.
Please note
u
If you register a headset, any headset
that is already registered will be over-
written.
u
If you would like to use a headset
already registered to another device
(e.g., a mobile) with your base, please
deactivate this connection before
you start the registration process.
u
Depending on the Bluetooth profiles
supported by your mobile, it can be
registered as a data device and a
mobile.
Searching for Bluetooth devices
The distance between the base in Bluetooth
mode and the activated Bluetooth device
(headset, mobile or data device) should be
no more than 10 m.
Any incoming calls are ignored during the
search.
¢ ¢
v ò Bluetooth
/ Search for Mobile /
Search for Data Device
Bluetooth mode is activated automatically
on the base if it is not already active. The
search is started. This can take up to
30 seconds.
The Bluetooth names of the devices found
are displayed in a list (abbreviated if neces-
sary). If no name has been assigned to a
device, the device address is shown.
Please note
The Search for Data Device function will
list all Bluetooth devices found with the
exception of headsets (list includes
multi-service devices).
118
Search for Headset
Cancelling/repeating current search
Cancel the search:
§Cancel§
Press the display key.
Repeat search if necessary:
In the known devices list:
§Options§
Press the display key.
Repeat Search
Select and press
Displaying the name and address of
a device found
In the list of devices found:
s
Select entry.
§View§
Press the display key.
The device name and address are displayed.
§OK§
Press to return to the list.
Adding the data device/mobile to the
known devices list
In the list of devices found:
q
Select the device to be regis-
tered.
§Options§
Press the display key.
Trust Device
Select and press
If the list of known devices contains fewer
than five data devices and mobiles:
~
Enter a PIN of your choice or the
PIN of the Bluetooth device to
be registered and press
Generally you can enter a PIN of your choice
for a data device/GSM mobile. You must also
enter this PIN in the data device/mobile
(handshake).
The device is saved in the list of known
devices.
If the list of known devices already contains
five data devices/mobiles, then the PIN
prompt is preceded by the message Select
device to be replaced and trust again. You
must select a device from the list to be
replaced by the new device before registra-
tion.
§OK§
.
§OK§
.
§OK§
.