Siemens Gigaset DX800A User Manual page 123

Connecting/using other devices
Please note
For instructions on sending vCards to a
Bluetooth device or receiving them from
a Bluetooth device, see
Using GSM mobiles (Link2mobile)
You can conduct calls on your base and/or a
registered handset via the GSM connection
on your Bluetooth GSM mobile (call external
parties via the GSM connection on the
mobile or accept calls via the GSM connec-
tion) if the following prerequisites are met:
u
Bluetooth mode is activated on the base
¢
and mobile ( page
u
Your GSM mobile has been registered
¢
( page 118) on the base and activated
¢
( page 120).
u
There is a Bluetooth connection estab-
lished between the base and mobile.
u
The mobile is in range of the base (less
than 10 m).
u
For outgoing calls: The mobile connec-
tion is assigned to the base as a send
connection, or the base can select the
GSM connection as a send connection
¢
( page 137).
u
For accepting incoming calls: The GSM
connection is assigned to the base as a
receive connection
A connection is automatically established
between the base in Bluetooth mode and
the activated mobile in range:
u
If a call arrives via the mobile's GSM con-
¢
nection ( page 54)
u
If you attempt to make a call on the base
via the GSM connection
If Bluetooth mode is deactivated on the
base:
¤
Open the list of known devices.
¤
Select the activated mobile (marked
with μ).
¤
Press the display key
¤
Select Connect Mobile and press
122
page 74.
117).
¢
( page 138).
¢
( page 52)
§Options§
.
§OK§
.
Bluetooth is activated on the base. The base
connects to the mobile.
Please note
u
You can also assign this function to a
function key on the base,
¢
Connect Mobile
u
If the mobile is taken beyond the
Bluetooth range of the base, you
should re-establish the connection
between the two as soon as the
mobile is within range again. This will
ensure that a GSM call either to the
base or from the base using the GSM
connection is transferred.
Establishing a manual connection:
¤
Select the mobile from the list of
known devices.
¤
§Options§
Select
§OK§
and press
Or:
¤
Press the function key Connect
Mobile.
Simultaneous Bluetooth
connections
Your base can connect to both a headset and
a data device/mobile via Bluetooth at the
same time.
However, please note the following:
u
The Bluetooth menu cannot be opened
on the base.
u
You can use the headset and at the same
time use a mobile/data device to initiate,
accept or manage a call.
u
You cannot use the headset while trans-
ferring data via Bluetooth.
on page 125.
¢
Connect Mobile
.