Table of Contents
Advertisement
Appendix
Using Gigaset QuickSync –
additional functions via the
PC interface
You can connect your base to your computer
via Bluetooth
(page 117)
cable supplied. To use the Bluetooth con-
nection, your PC must be equipped with a
suitable dongle and Bluetooth must be acti-
vated on the base.
Please note
It is not possible to have two parallel con-
nections active between the PC and base
via Bluetooth and LAN.
You can access base functions and data from
your PC via AT commands.
The "Gigaset QuickSync" program (found
on the enclosed CD) provides you with a
convenient interface for communicating
with the base.
¤
Install this program on your PC.
Here are some of the functions that will then
be available to you:
u
Reading service information, e.g.,
firmware version, serial number, manu-
facturer, MAC address of the base.
u
Synchronising the directory on your base
with your PC's Outlook contacts.
u
Transferring images as screensavers/
caller pictures from the PC to the resource
directory on the base.
u
Downloading sounds (ringer melodies)
from the PC to the base.
You can also use AT commands to:
u
Make outgoing calls and accept incom-
ing calls. The display on the base behaves
as if the call was being handled directly
on it.
156
or via the Ethernet
Data transfer
During the transfer of data between the
base and PC, the message Data transfer in
progress is shown on the display.
Any incoming calls are ignored during this
time. You can use the red end key
cancel the data transfer. You cannot enter
anything else via the keypad while data
transfer is in progress.
Using Open Source software
contained in the product
The firmware for your Gigaset phone
includes integrated Open Source licensed
software from third-party providers. These
integrated Open Source software files are
protected by copyright. Rights of use for this
Open Source software that extend beyond
the pure scope of the program execution
intended by Gigaset Communications
GmbH are stipulated in the license condi-
tions for the Open Source software.
If these rights of use are observed, then the
Open Source software can be used as the
license intended. Conflicts may arise
between the license conditions of Gigaset
Communications GmbH and the Open
Source software license conditions. In such
cases, the Open Source software license con-
ditions have priority for the relevant Open
Source parts of the software. You will find
the licence text in its original English version
on the pages that follow. The license condi-
tions are also available at the following web-
site: http://www.gigaset.com/opensource/
If the programs contained in this product are
licensed as part of the GNU General Public
License (GPL), GNU Lesser General Public
License (LGPL) or another Open Source soft-
ware license that requires the disclosure of
the source code, and the product does not
contain software in source code format, then
the source code and copyright information
relating to this software can be downloaded
from the following Internet site:
http://www.gigaset.com/opensource/
T
to
Hide quick links:
Advertisement
Table of Contents
