Table of Contents
Advertisement
Connecting the base station
Insert the phone cable into the connec-
tion socket
1
at the rear of the base
station and feed under the cable protec-
tion.
Insert the power cable for the power
adapter into the connection socket
the rear of the base station and rotate the
right-angle plug under the cable protec-
tion.
First connect the power adapter
Then connect the phone jack
The network cable must always be connected in order to function, as the phone will
not operate without a power supply.
Only use the supplied network cable and phone cable. The pin connections on
phone cables may vary (
Handset
Connecting the charging cradle (if included)
Connect the flat plug of the power
adapter
.
1
Plug the power adapter into the power
socket
.
2
To remove the plug from the charging cradle
again:
Disconnect the power adapter from the
mains power supply.
Press the release button
Pull out the plug
at
2
.
3
4
.
pin connection can be found in the appendix).
.
3
.
4
Connecting the base station
3
2
2
4
1
4
1
3
9
Advertisement
Table of Contents
