Connecting The Base - Gigaset SL930A Manual

Connecting the base

2
3
¤
Insert the phone cable into the connection socket
into place.
¤
Insert the power cable from the power adapter into the connection socket
¤
Push both cables into the appropriate cable channels
¤
Place the cover in the notches on the back of the base
¤
First connect the power adapter
u
The power adapter must always be connected, as the phone will not operate
without a power supply.
u
Use only the supplied power adapter and phone cord. The pin connections on
telephone cables may vary (pin connections,
Mounting the base on the wall (optional)
approx. 2.5 mm
Mounting material not included in scope of delivery.
1
3
4
and then the phone jack
5
4
at the rear of the base until it clicks
1
3
.
3a
page 99).
Getting started
3a
2
.
(not if mounting on the wall).
5
.
7