Text Messages To A Pabx; Errors When Sending And Receiving A Text Message - Gigaset C2 Operating Manual

SMS (text messages)
Text messages
You can only receive a text message when the Calling Line Identification is for-
warded to the extension of the PABX (CLIP).
The CLIP of the phone number of the SMS centre is evaluated in your telephone.
If your phone is connected to a PABX, you may have to prefix the number of the SMS
centre with an access code (this depends on your PABX). You can store the access code
in your base (page 129).
If in doubt, you can test your PABX by sending a text message to your own number and
putting the access code before the number of the SMS centre. If you do not receive the
message, send another one, this time without the access code.
When you send messages, your sender number may be sent without your extension
number. The recipient cannot reply to you directly in this case.

Errors when sending and receiving a text message

Errors when sending a text message
Text messages that cannot be sent are assigned an error status FD error: and are
placed in the incoming message list.
The following error codes are displayed:
Error code Description
E0 Calling Line Identification is permanently deactivated (page 24).
FE Error occurred during message transfer.
FD Connection to SMS centre failed.
Text messages cannot be sent or received if the number of an SMS cen-
tre is missing or incorrectly stored. Check that the number of the SMS
centre has been stored.
C3 Wrong recipient phone number
You can display information about the cause of errors on the screen.
Precondition: You have opened the incoming message list (page 64).
s
à
s
Error status
[RRRRRRRRRRRRRRRRRRRRRRRRRRR]
BACK
70
to a PABX
Scroll to the text message you were unable to send.
Press display key to open menu.
Select the menu item and confirm. The cause of the
OK
error appears in the display.
Now press the display key to return to the incoming
message list.