Base Station Settings; Restoring The Base Station To Factory Settings; Activating/Deactivating Repeater Mode; Setting Up An Emergency Number - Gigaset C460 IP Manual

Base station settings

Base station settings
The base station settings are carried out
using a registered Gigaset C46 handset.
Changing the system PIN
You have to enter the system PIN when
registering a handset to the base station.
You can change the base station's 4-digit
default system PIN ("0000") to a 4-digit
PIN known only to yourself.
¢ ¢
Settings
§Menu§
~
Enter current system PIN and
press
§OK§
~
Enter your new system PIN
and press
For security reasons, " **** " is displayed
instead of the system PIN.
a
Press and hold (idle status).
Restoring the base station to
factory settings
When the settings are restored all hand-
sets are de-registered. The individual set-
tings are reset. Only the date and time are
retained.
¢ ¢
Settings
§Menu§
Press the display key to
§OK§
confirm.
Activating/deactivating repeater
mode
With a repeater you can increase the
range and reception strength of your base
station. You have to activate the repeater
mode for this. This will terminate any calls
being made via the base station at that
time.
38
¢
Base System PIN
.
.
§OK§
¢
Base Base Reset
Precondition: a repeater is registered.
¢ ¢
Settings
§Menu§
¢
Features Repeater Mode
Select and press
Setting up an emergency
number
Emergency numbers are automatically
dialled via the fixed network. You can set
up your own emergency number.
¢ ¢
Settings
§Menu§
¢
Features Additional Emergency No.
~
Enter the system PIN and press
.
§OK§
If an emergency number is already saved,
this will be displayed.
~
Enter emergency number and
press
§OK§

Set default connection

You can make settings according to
whether you want to make calls via VoIP or
fixed network by default.
¢ ¢
Settings
§Menu§
Type
/
IP fixed line
Select and press
When making calls:
¤
Briefly press the talk key c if you want
to make a call via this default connec-
tion.
¤
Press and hold the talk key c if you
want to make a call via the other con-
nection type.
¢
Base Additional
(‰ = on).
§OK§
¢
Base Additional
.
¢
Base Default Line
(‰ = on).
§OK§