Base Settings; Changing The Base Ringtones; Activating/Deactivating Music On Hold; Protecting Against Unauthorized Access - Gigaset C590 User Manual

Gigaset C590/C595 / USA-CAN engl / A31008-M2101-R301-1-3S19 / registr_sett.fm / 28.07.2009

Base settings

The base settings are performed using a
registered Gigaset C59H handset.

Changing the base ringtones

u
Volume:
You can choose between five levels of
volumes (1–5; e.g. level 3 = Š) and
the "crescendo" ringtone (6; where the
volume increases with each ring =
‡).
u
Ringtones:
You can select a ringtone from a list of
pre-loaded ringtones.
In idle state:
¢
v
Audio Settings
¢

Ringtones (Base)

¤
Change multiple line input:
r
s
r
§Save§
•
Activating/deactivating

music on hold

¢
v
Audio Settings
¢
Music on Hold
Press
§Change§
music on hold (³ = on).
•
Protecting against
unauthorized access
Protect the system settings of the base
with a PIN known only to yourself. You
must enter the system PIN when, for
example, you register/deregister a hand-
set to/from the base or when you restore
the default settings.
Set volume.
Scroll to the next line.
Set melody.
Press the display key to save
the setting.
to activate or deactivate the
Changing the system PIN
You can change the 4-digit system PIN set
on the base (the default is: 0000) to a 4-
digit PIN known only by you.
Gigaset C595 only: Setting a system PIN
facilitates remote operation of the
¢
answering machine
Ï
¢ ¢ ¢
v
System
~
Enter the current system PIN
and press
§OK§
~
Enter your new system PIN
and press
§OK§
Resetting the system PIN
If you have forgotten your system PIN you
can reset the base to the original code
0000:
u
Disconnect the power cord from the
base.
u
Hold down the registration/paging but-
ton on the base while reconnecting the
power cable to the base.
u
Keep the key pressed for at least 2
seconds.
The base has now been reset and the sys-
tem PIN 0000 set.
Please note
All handsets are deregistered and must
be re-registered. All settings are
restored to the factory settings.
•
Restoring the base to the
factory settings
When the settings are restored:
u
Date and time are retained
u
Handsets are still registered.
u
Eco Mode is switched on.
u
The system PIN is not reset.
Ï
¢ ¢ ¢
v
System
~
At the prompt, enter the sys-
tem PIN and press
Press the display key.
§Yes§
Base settings
page 39.

System PIN

.
.

Base Reset

.
§OK§
51