Setting Up A Busy Signal For When The Msn Is Being Used (Busy On Busy); Activating/Deactivating Call Waiting - Cw; Anonymous Calling - Withholding Caller Id (Clir) - Gigaset CX590 ISDN User Manual

Setting up a busy signal for
when the MSN is being used
(Busy on Busy)
This setting means callers hear a busy tone
immediately when an external call is already
being made on this MSN, regardless of the
Call Waiting setting (¢ page 65).
v ¤ Ç ¤ Busy on Busy
¤
§Change§
(³= on)
Activating/deactivating call
waiting – CW
If the function is activated, you will hear a
call waiting tone during an external call to
signal that another external caller is trying to
get through. If you have CLIP, the number of
the waiting caller or the corresponding
directory entry is shown in the display. The
caller will hear the ringing tone.
When call waiting is deactivated, the caller
will hear the busy tone if you are already
making a call if you are the only party
assigned to this connection .
Activating/deactivating call waiting
v ¤ Ç ¤ Call Waiting
Status
Activate/deactivate call waiting and
§Save§
press .
Please note
Handling an external waiting call
(¢ page 34).
Anonymous calling –
withholding caller ID (CLIR)
You can withhold your number (CLIR = Call-
ing Line Identification Restriction). Your
phone number will not be displayed when
making outgoing calls; you are calling anon-
ymously.
Prerequisite: the feature is supported by
your network provider.
When this function is activated, the phone
number is withheld for all calls from all regis-
tered handsets.
v ¤ Ç ¤ All Calls Anonymous
¤
§Change§
(³= on)
Please note
Withhold the number for the next call
only (¢ page 38).
Creating ISDN settings
65