Activating/Deactivating Call Waiting - (Cw); Restoring The Factory Setting - Gigaset CX150 isdn Instructions Manual

System settings
Activating/deactivating Call Waiting – (CW)
This function can be set up separately for each user. When call waiting is activated the
caller will hear the ringing tone if you are already making a call. This call is announced
both acoustically, and visually on your handset screen.
When call waiting is deactivated, the caller will hear the ringing tone if you are already
making a call and other phones are assigned to this MSN.
When call waiting is deactivated, the caller will hear the busy tone if you are already
making a call and yours is the only phone assigned to this MSN.
The function is activated when the phone is supplied. For how to deal with a waiting
external call, see page 22.
MENU
s
Base Settings
s
Settings
~
OK
s
Setup user
s
Setup device
s
Int.11
MENU
s
Call waiting

Restoring the factory setting

All functions are restored to the factory settings. The system PIN is reset to "0000". All
entries (calls list) are deleted.
Before resetting, deactivate all active call transfers! The handsets are still
i
registered.
MENU
s
Base Settings
s
Settings
~
OK
s
System settings
s
Spec. function
s
Factory setting
s
Reset all
78
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Enter system PIN if required (page 69).
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Select internal number, e.g. Int.11.
Open the submenu.
Select the menu item and confirm (
OK
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Enter system PIN if required (page 69).
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
‰
= activated).