Setting The Alarm Clock; Phone Settings - Gigaset A230 Manual

Listening in to an external call
You are conducting an external call. An internal participant can listen in on this call and
take part in the conversation (conference). Prerequisite: The Listening in function
must be activated.
Activating/deactivating listening in
¤ u ¤ u
¤
MENU Settings OK
Internal listening in (conference)
You want to listen in to an existing external call. Press and hold the
ten in to the call. All participants hear a signal tone.
a
To end: press the end call key
If the first internal participant presses the end call key
tened in" remains connected to the external participant.

Setting the alarm clock

Activating/deactivating the alarm clock
¤ u
¤
MENU Alarm Clock OK
~
¤
When activated: (Set the wake-up time)
When the alarm clock rings, press any key to switch it off for 24 hours. If the alarm clock
l
is set, the wake-up icon will appear on the screen and the wake-up time will be dis-
played instead of the date.
Setting the wake-up time
¤ u
¤
MENU Alarm Clock OK
Enter the wake-up time in hours and minutes, then press OK.

Phone settings

For details on how to make audio settings, see menu overview
For details on how to set the system PIN on the base station, see the menu overview
¢
page 12.
Changing the display language
¤ u ¤ u
¤
MENU Settings OK
¤
language) OK
The current language is indicated by
If you accidentally choose a language you do not understand:
521
¤
MENU (press the keys one after the other)
¤ u
¤ ¤
Base OK Listening in OK (
b
. All participants hear a signal tone.
a
, the handset that has "lis-
‰
¤ ¤
Activation OK ( = on)
¤
OK
¤ u
¤
Wake-up time OK
¢
page 12.
¤ u
¤ ¤
Handset OK Language
‰
.
¤ u
(select language)
8
Activating/deactivating music on hold
You can make it so that your external participant hears music in case of internal recall
and during call transfer.
P#Q5#1M
¤
MENU
0 = off; 1 = on
‰
= on)
Repeater mode
With a repeater you can increase the range of your base station. You will need to acti-
vate repeater mode (
key. You can lis-
¢
( page 12) cancel each other out.
Resetting the handset
You can reset individual settings and changes that you have made. Entries in the direc-
tory, the calls list and the handset's registration to the base station will be retained.
¤ u
MENU
¤
OK
Cancel the reset with
Restoring the base station
When restoring factory settings the No Radiation mode is deactivated, individual set-
tings are reset and all lists are deleted.
The date and time are retained.
Resetting the base via the menu
Handsets are still registered, the system PIN is not reset.
¤ u
MENU
Resetting the base using the key on the base
All handsets are de-registered and the system PIN is reset to the original code 0000.
Carry out the following steps: Remove the mains cable from the base. Hold down the
registration/paging key on the base (
the base at the same time. Hold the key down for at least 5 seconds.
¤ u
OK (select
¤
OK
¤
The number for the current setting flashes: 
¤ ¤
enter number OK.
¢
page 12). Repeater mode and No Radiation mode
¤ u
¤ ¤
Settings OK Handset OK
a
.
¤ u ¤ u
¤ ¤
Settings OK Base OK
¢
page 1) and reconnect the power cable to
¤ u
¤ ¤
Reset Handset OK Reset?
¤ ¤ ¤
Base Reset OK Reset? OK