Security Settings; Changing The System Pin; Defining Authorisations - Gigaset S44 User Manual

Security settings

Changing the system PIN

You can protect the following settings against unauthorised access using the system PIN
(Personal Identification Number):
Call charges and settings
◆
Internal and external call diversion
◆
SMS service centres, subscriber configurations, security, ISDN and system settings
◆
Getting started wizard
◆
The system PIN will not work with the number 0000.
¢ ¢
v Ð
Base
~
OK
~
OK
Memorise the new system PIN! If you forget it, the device will require
!
technical intervention. If this happens, contact the Siemens Hotline
(page 135).

Defining authorisations

You can set different authorisations for all registered devices:
◆ Unrestricted
All devices can answer incoming calls and make external/internal outgoing calls.
Incoming only
◆
The devices can only answer incoming external calls. External outgoing calls are not
possible. Internal calls (outgoing and incoming) are possible. Emergency numbers
can be dialled.
◆ Internal only
The devices can only be used for internal calls (incoming and outgoing). Emergency
numbers can be dialled.
¢ ¢
v Ð
Base
s
INT11: Int.11
Í
s
Internal only
¢ ¢
Settings Security
Enter new system PIN (up to 8 digits, 0 to 9)
and confirm.
Retype the new system PIN and confirm.
¢ ¢
Settings Security
Select the internal number, e. g., INT 11.Int.11
Press the display key to open the submenu.
Select authorisation, e. g. Internal only and con-
firm. The set authorisation is marked with ‰.
¢
Change PIN
¢
Authorisation
Security settings
83