Setting The Walk And Talk Mode - Gigaset C2 Operating Manual

Deactivating the room monitor
Press the OFF display key on the room monitor handset to deactivate the room monitor
function.
To reactivate the room monitor function with the same telephone
i
number, you must turn on the activation again and save with
Deactivating the room monitor remotely
You can deactivate the room monitor remotely. Take the call from the room monitor and
9 ;
press the keys. The room monitor function will deactivate around 90 seconds
after the call ends. After this, the room monitor will make no further calls. The other
room monitor functions on the handset (e.g. no ringer) will remain activated until you
press the display key

Setting the Walk and Talk mode

The Walk and Talk function allows two handsets to communicate with each other no
matter how far they are from the base.
Example: You go on holiday and take two handsets with Walk and Talk functionality
with you. Set the Walk and Talk function on both handsets. You can now communicate
using the handsets.
Precondition:
Both handsets have been registered to the same base or
◆
Both handsets are registered to different bases and both are set to Best Base
◆
(page 21) or
One of the handsets is not registered to any base and the registered handset is set
◆
to Best Base or
Neither handset is registered to a base.
◆
In Walk and Talk mode
The maximum range between handsets is 300 metres outdoors,
◆
i
The handsets cannot be reached by incoming calls.
◆
Handset operating times are severely curtailed.
◆
on the handset that is in the baby's room.
Off
Operating more than one handset
.
Save
79