Warning Messages
The following table lists warning messages, possible causes, and the actions required to correct each
cause.
Mar 00
Warning Message
Possible Cause
Line 2 of display
Paper Out Tray 1
There is no paper in Tray 1.
Paper Out Tray 2
There is no paper in Tray 2.
Paper Out Tray 3
There is no paper in tray 3.
Output Tray Full
The output tray is full.
Offset Tray Full
The offset output tray is full.
Toner Low
The toner is low.
Maintenance Req
Maintenance is required.
Warning Messages and Error Messages
Genicom
microLaser 210 User Guide 5-27
Action
Add paper to the tray.
Add paper to the tray.
Add paper to the tray.
Remove paper from the tray.
Remove paper from the tray.
Replace the toner cartridge
soon.
Call service.
Publication No. GEG-99054