Space Requirements - Genicom microLaser 210 User Giude

1-4 microLaser 210 User Guide
Printer Location Requirements

Space Requirements

A certain amount of space is required for proper operation of the printer and also for performing
printer maintenance and replacing consumables. Use the following figures to plan for appropriate
clearances when determining a location for your printer.
CAUTION: There is a ventilation opening on the left side of the printer. To avoid overheating
and fire hazards, be sure to leave a clearance of at least 8 inches (200 mm) between this
opening and the nearest wall or other surface.
Publication No. GEG-99054
8 inches
(200 mm)
24 inches
(600 mm)
12 inches
(300 mm)
Figure 1-1: Top view of the printer.
24 inches
(600 mm)
Figure 1-2: Side view of the printer.
Genicom
24 inches
(600 mm)
20 inches
(500 mm)
24 inches
(600 mm)
Mar 00