Table of Contents
Advertisement
7-12
microLaser 210 User Guide
Loading Print Media
Store reams of paper in an area away from both direct sunlight and high humidity
I
Open sealed reams only when you are ready to load the paper into the paper tray, and always
I
close and seal partial reams of paper.
Do not stack partial reams of paper
I
Print Media Weight, Type, and Size
The 550 sheet feeder has paper guides that allow you to accommodate paper with the following
dimensions:
• Paper Width: 98.4mm minimum to 215.9mm maximum
• Paper Length: 148.5mm minimum to 355.6mm maximum
The following table defines print media that you can use in the 550 sheet feeder paper tray, and also
indicates the feed orientation—long edge feed (LEF) or short edge feed (SEF). If you have concerns
about a specific brand or type of media, try samples of the media to determine if the resulting
printer performance and print quality meet your expectations.
Loading Print Media
Loading the A4/Letter/Legal Paper Tray
The 550-sheet universal paper tray has two width guides that are located on the sides of the tray,
and one length guide that is located near the center of the tray. These guides allow you to adjust the
size of the area that holds paper.
NOTE:
The following procedure shows you how to load paper into the main paper tray. To load paper
into the optional 550 sheet paper feeder, simply complete the procedure using the 550 sheet
paper tray and feeder rather than the main paper tray.
Publication No. GEG-99054
Paper Source
Weight
Universal A4/Letter/
55-134 kg
Ledger Paper Tray
16 to 24 lbs.
(main tray and optional
60 to 216g/m
550 sheet A4/Letter/
Ledger paper feeder)
Paper Type and
Feed Direction
A4 SEF
2
Letter SEF
Legal 13" SEF
Legal 14" SEF
Executive SEF
B5 SEF
A5 SEF
Genicom
Paper Sizes
Accommodated
297 x 210mm
11.7 x 8.27 inches
279.4 x 215.9mm
11 x 8.5 inches
330.2 x 215.9mm
13 x 8.5 inches
355.6 x 215.9mm
14 x 8.5 inches
266.7 x 184.5mm
10.5 x 7.26 inches
257 x 182mm
10.1 x 7.2 inches
210 x 149mm
8.27 x 5.9 inches
Mar 00
Advertisement
Table of Contents
